Effect of environment and heat treatment on the optical properties of RF-sputtered SnO2 thin films

Thin films of SnO₂ were deposited by RF-magnetron sputtering on quartz substrates at room temperature in an environment of Ar and O₂. The XRD pattern shows amorphous nature of the as-deposited films. The optical properties were studied using the reflectance and transmittance spectra. The estimated optical band gap (E_g) values increase from 4.15 to 4.3 eV as the Ar gas content decreases in the process gas environment. The refractive index exhibits an oscillatory behavior that is strongly dependent on the sputtering gas environment. The Urbach energy is found to decrease with increase in band gap. The band gap is found to decrease on annealing the film. The role of oxygen defects is explored in explaining the variation of optical parameters.     

A novel antimicrobial flavonoidic glycoside from the leaves of Alstonia macrophylla Wall ex A. DC (Apocynaceae)

<正>A new flavonoidic glycoside,tricin-4'-O-β-L-arabinoside(1) was isolated from the leaves of Alstonia macrophylla along with two known flavonoids,vitexin and myricetin-3′-rhamnoside-3-O-galactoside.Their structures were established by chemical and spectral evidences.The known compounds were reported for the first time from this plant.Moreover compound 1 was tested for antifungal and antibacterial activities.     

New cytotoxic isoprenoid derivatives from the Red Sea soft coral Sarcophyton glaucum

Chemical investigation of the soft coral Sarcophyton glaucum collected from the Red Sea led to isolation of 11 isoprenoidal metabolites (1–11). A new sesquiterpenoid, 6-oxo-germacra-4(15),8,11-triene (1), a new natural cembranoid, sarcophinediol, along with two known sesquiterpenoids (2 and 3) and seven known cembranoids (5–11) was obtained. The structures of the compounds were established based on their NMR, MS, IR and UV spectral data. All compounds were evaluated for their cytotoxicity employing three cancer cell lines (HepG2, MCF-7 and HCT116). Compounds 4 and 6 showed significant cytotoxicity towards HepG2 with IC₅₀ values of 18.8 ± 0.07 and 19.9 ± 0.02 μM; respectively. Compounds 5–7 exhibited potent cytotoxicity against MCF-7 cells with IC₅₀ values of 9.9 ± 0.03, 2.4 ± 0.04 and 3.2 ± 0.02 μM, respectively. Compounds 1, 4 and 5 showed significant activities towards HCT116 cells with IC₅₀ values of 29.4 ± 0.03, 19.4 ± 0.02 and 25.8 ± 0.03 μM, respectively.     

Magnetic,Electrical and Thermal Studies of Polypyrrole-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanocomposites

This research paper comprises of the synthesis of polypyrrole (PPy)-Fe₂O₃ nanocomposites by employing the in situ chemical oxidative polymerization method. The concentration of the filler material was adjusted between 10–50 wt % of PPy. The synthesized nanocomposites were characterized by using X-ray diffraction (XRD). Magnetic analysis and DC electrical conductivity of the samples were carried out using vibrating sample magnetometer (VSM) and two probe DC conductivity method, point towards magnetically active and electrically conductive samples. The magnetic parameters under applied magnetic field demonstrated that the values of coercivity (H _c ), saturation magnetization (M _s ) and remanence (M _r ) can be tailored by carefully controlling the amount of dopant material into the nanocomposites indicating their suitability for controllable switching devices and microwave absorption applications. The DC electrical conductivity showed an increase up to 20 wt % of filler material and thereafter a decrease in the conductivity of nanocomposites with increase in filler content is observed. Thermogravimetric analysis (TGA) showed an increase in thermal stability with an increase in ferrite content in nanocomposites.     

A Validated TLC-Densitometric Method for the Simultaneous Determination of Formoterol Fumarate and Budesonide in Pressurized Metered-Dose Inhaler

JPC – Journal of Planar Chromatography – Modern TLC - A simple and robust thin-layer chromatography (TLC) method has been developed and validated for the simultaneous quantitative...     

A centrally cracked thin circular disk, Part I: 3D Elastic–plastic finite element analysis

A full field solution, based on small deformation, three-dimensional elastic–plastic finite element analysis of the centrally cracked thin disk under mode I loading has been performed. The solution for the stresses under small-scale yielding and lo!cally fully plastic state has been compared with the HRR plane stress solution. At the outside of the 3D zone, within a distance of rσ_o/J=18, HRR dominance is maintained in the presence of a significant amount of compressive stress along the crack flanks. Ahead of this region, the HRR field overestimate the stresses. These results demonstrate a completely reversed state of stress in the near crack front compared to that in the plane strain case. The combined effect of geometry and finite thickness of the specimen on elastic–plastic crack tip stress field has been explored. To the best of our knowledge, such an attempt in the published literature has not been made yet. For the qualitative assessment of the results some of the field parameters have been compared to the available experimental results of K, gives a fair estimate of the crack opening stress near the crack front at a distance of order 10⁻² in. On the basis of this analysis, the Linear Elastic Fracture Mechanics approach has been adopted in analyzing the fatigue crack extension experiments performed in the disk (Part II).     

Synthesis of Some Novel Imidazopyrazole and Pyrazolopyrimidine Derivatives

5‐Amino‐3‐anilino‐1H‐pyrazole‐4‐carbonitrile 1 was alkylated with various halo reagents under phase transfer conditions to give the corresponding imidazopyrazole derivatives 2a , 2b , 2c , 3 , 4 , 5 , 6 . Pyrazolo[1,5‐a] pyrimidine derivatives 11 , 12 , 13 , 14 were prepared by treating compound 1 with different dicarbonyl reagents, namely, diethymalonate, ethyl 3‐oxo‐3‐phenylpropanoate, pentane‐2,4‐dione or ethyl 3‐oxobutanoate.